 We've
created Logic environment setups for the UC-33 and Keystation
pro 88 which provide immediate hands-on control over
the Track Mixer and individual Channel Strips.
The new environment gives control over Volume, Pan
and 2 Sends for the first 16 audio channels displayed
in the Track Mixer plus full control over 4-band EQs,
8 Sends, Mute, Solo, Pan and Volume for each Channel
Strip.
UC-33
PC
Mac
Keystation Pro 88
PC
Mac
Here is how
to set it up:
1. Download the Logic setup.
2. Un-zip or un-stuff it.
3. Import the UC-33 or Keystation Pro 88 song file into
Logic.
4. On the UC-33 recall preset number 011. On the Keystation
Pro 88 recall preset 8.
5. Place the Channel Strip overlay over the UC-33.
You should
now be able to control volume, pan, solo, mute, 8 sends
and even the 4 bands of EQ for the currently selected
track. We have chosen the Parametric EQ algorithm for
our setup, though you can use any of the other options
with this setup. You will need to make sure to switch
on each band individually using the EQ on/off buttons.
You can also import the Environment into one of your
own existing Logic files. From the Environment window
in your own setup, go to 'Options' - 'Import Environment'.
Choose what part of the Environment you want to install.
We recommend 'Total Replace'. Then select the UC-33
Setup file.
Using UC-33 for Multi-channel Mixing (for Keyststion
Pro 88 see instructions with download):
You can also
use them as a multi-channel mixer in Logic.
To change to multi-channel mixer mode press 7 on the
UC-33. When the LCD display shows 127 when you press
it, the switch in the Logic Environment is switched
to the Multi-channel mixer mode. The UC-33 will now
control the volume, pan and first two sends of the first
8 audio tracks. To switch back to the Channel Strip
mode, just press '7' again (LCD displaying 000 when
pressed).
If you want to switch between controlling tracks 1-8
and 9-16 in the Multi-channel mode, press '8' on the
numeric keypad (LCD showing 000 for tracks 1-8 and 127
for tracks 9-16). Remember to make sure you are already
in the Multi-channel mode or pressing' '8' will have
no effect.
You can always check to see what position the switches
are in by opening the Logic environment window. |
